Skip to guide content

How to Turn a Dieline into a 3D Mockup

Use cut and crease layers to build a foldable mockup, check panel artwork, and choose the right export.

In this guide 5 sections

Fold Studio turns a supported SVG dieline into an interactive 3D mockup. It reads structural cuts and creases, lets you choose fold lines and angles, and can display exterior and interior artwork. Use it to review a card or package before making a physical proof.

This is a panel-folding workflow. For giving a flat logo a solid depth, use the separate SVG-to-3D extrusion tool.

1. Start with a suitable dieline

Use an SVG with clear cuts and creases layers. The outer cuts need to describe panels the tool can identify, while crease lines define their hinges. A photograph of a box, an ordinary logo, or a flattened drawing without fold structure will not automatically become a working package.

For a first test, choose Try a sample box. For your own template, use the dieline generator and its Fold this dieline in 3D action, or use Browse files in Fold Studio. Check the reported panel and fold-line counts after import.

2. Select hinges and adjust the angle

Click a green fold line in the scene or choose it from the fold list. Shift-click adds another hinge to the selection. All and None help select or clear the full set.

Use the Angle slider or the −90°, Flat, and 90° buttons. Flip changes the fold direction. Start one fold at a time for an unfamiliar template, since applying the same angle everywhere may not suit its structure.

Fold Studio sample box with five hinges selected and a 90 degree fold displayed in 3D
The built-in sample has six panels and five fold lines. This screenshot shows its hinges folded to 90 degrees. Select the image to view it full size.

Drag the scene to orbit and scroll to zoom. Rotate the view enough to inspect front, back, sides, and overlaps. Reset camera helps recover the view, while Reset all folds returns the structure to its starting state.

3. Add artwork and review materials

Upload Exterior and Interior images under Artwork & Material as needed. Use artwork aligned to the flat layout, then inspect how it lands on each folded face. A good-looking front face can still hide an upside-down label on another panel.

Adjust Thickness, Board color, and Edge color for a more useful visual reference. These controls improve the mockup’s appearance; they do not certify real board behavior or replace a material-specific structural test.

Use Advanced orientation when the imported structure needs a different overall orientation. Check the fold selection and sign before changing many settings to compensate for one reversed hinge.

4. Choose a still image, model, or animation workflow

PNG snapshot saves a rendered view. Choose the camera angle, background, and Lines visibility deliberately before exporting. A snapshot is useful for a review, but it does not contain editable fold geometry.

Download 3D model (GLB) and Rigged GLB (armature) are marked PRO. The rigged export is also labeled Beta. Check the exported model in the application where you intend to use it.

Animate opens a separate Beta workflow for fold states and timing. Test a simple sequence before building a long one, and review the destination’s support for any downloaded animation.

Why did my dieline fold incorrectly?

Check missing or misnamed structural layers, gaps in panel outlines, crease positions that do not connect the intended panels, and decorative paths mixed with structural cuts. Compare with the working sample rather than assuming every visually similar SVG has the same structure.

Keep the flat dieline and artwork as source files. Use the mockup to spot orientation and placement problems, then assemble a real sample before approving fit, material allowance, or production.

Make it yours.

Keep this guide open and give it a try.

Open Fold Studio